Koffiekamer « Terug naar discussie overzicht

3D printing

6.220 Posts, Pagina: « 1 2 3 4 5 6 ... 306 307 308 309 310 311 | Laatste

Omlaag ↓

Midstock 11 oktober 2023 17:32

Eind van deze maand moet Pyrogenesis meer dan 1 dollar waard zijn, anders worden ze uit de nasdaq gehaald toch?

R dayhigh 24 oktober 2023 15:19

quote:
Midstock schreef op 11 oktober 2023 17:32:
Eind van deze maand moet Pyrogenesis meer dan 1 dollar waard zijn, anders worden ze uit de nasdaq gehaald toch?

ja dat klopt. ik zie ook geen indicatoren dat dat niet gaat gebeuren overigens

mjmj 5 november 2023 15:45

iron ore, plasma burners at Rio Tinto:
coremsymposium.com/wp-content/uploads...

MadMushroom 13 december 2023 14:41

Benieuwd naar hoe jullie omgaan met deze toch wel heftige koersdalingen bij PYR. Blijven bijkopen of toch maar even de kat uit de boom kijken?...

voda 2 januari 2024 11:32

Revolutionizing Medicine: Self-Heating Microfluidic Devices

By Strategic Research Institute on Jan 02, 2024 12:44 pm

Synopsis

MIT pioneers a groundbreaking 3D printing method creating self-heating microfluidic devices. These tiny machines, heating fluids through electricity, promise cost-effective and customizable disease detection tools for remote regions globally, simplifying complex processes and reducing costs to mere dollars.

Article

The Massachusetts Institute of Technology (MIT) has unveiled a game-changing innovation in medical technology. Scientists there have devised a new approach to crafting microfluidic devices using 3D printing, heralding a potential revolution in disease detection and diagnostics. This breakthrough could substantially impact healthcare accessibility in remote regions worldwide.

Microfluidic devices are miniature machines designed to manipulate small amounts of fluids, crucial for conducting chemical reactions and diagnosing diseases. The technology behind at-home COVID-19 test kits is a basic form of these devices. Traditionally, crafting such devices has been intricate and expensive, involving specialized clean rooms and costly materials like gold or platinum. However, MIT's novel method employs 3D printing, enabling the production of these devices affordably and efficiently.

The technique, termed multimaterial extrusion 3D printing, involves using different materials, including a modified version of a common biodegradable plastic, PLA, mixed with copper nanoparticles. This amalgamation transforms the insulating PLA into an electrical conductor. Upon passing an electrical current through it, the material heats up, thereby raising the temperature of the fluids within the device.

This groundbreaking technology isn't just cost-effective, with material costs amounting to a mere $2, but it's also highly customizable. Engineers can design devices tailored to heat fluids to precise temperatures or specific patterns, lending versatility for diverse applications.

However, challenges persist. The PLA material's temperature threshold, capping at approximately 50°C, limits its use for certain chemical reactions requiring higher temperatures. Additionally, achieving precise temperature control necessitates integrating a third material capable of temperature sensing.

Moving forward, MIT's team is exploring incorporating magnets into these devices, envisioning applications in particle sorting for specific chemical reactions. Moreover, their focus lies in understanding why PLA turns conductive with specific impurities, aiming to enhance the devices' capabilities.

This innovation holds promise, particularly for disease detection in underprivileged regions where access to expensive lab equipment is scarce. The simplicity, cost-effectiveness, and potential for wide-reaching applications make it a transformative breakthrough in medical technology.

Conclusion

MIT's pioneering 3D printing technique for self-heating microfluidic devices stands as a monumental stride forward in medical technology, promising enhanced accessibility to advanced medical diagnostics on a global scale.

Bron Steelguru (via email)

Bijlage:

voda 2 januari 2024 11:35

Empowering Villages: 3D Printing Drives Xizang's Development

By Strategic Research Institute on Jan 02, 2024 12:38 pm

Synopsis

A 3D printing construction firm in Lhasa, Xizang, elevates village development within six months, surpassing a 1.2 million yuan output. Yingcai Construction Technology, backed by two village committees, revitalizes the region, creating jobs, utilizing waste, and crafting vibrant furniture. The technology enhances efficiency, quality, and market prospects, offering promising dividends to villagers and creating a path for technological advancement in rural economies.

Article

In Lhasa, Xizang's capital, a 3D printing construction company, Yingcai Construction Technology, has swiftly become a beacon of progress in village development. Established merely six months ago in Tselgungthang Subdistrict's Tsal Village, this enterprise has already exceeded a significant output value, surpassing 1.2 million yuan (about $169,173 USD).

Owned by the subdistrict's village committees, this company operates from a well-equipped workshop, bustling with 3D printers producing vibrant and diverse furniture, including tables and chairs. Zhang Yonghai, a subdistrict official, notes the substantial impact on employment opportunities and the economic rejuvenation within the community.

Notably, Yingcai not only generates employment but also champions waste recycling, offering economic, social, and ecological benefits. Chairman Xia Dong emphasizes the technology's prowess, citing enhanced construction efficiency, reduced project timelines, and superior product quality like flower pots and isolation strips, promising a favorable market reception.

Towards the year-end, village residents anticipate dividends from the company's success. Dainzin Zhoigar, an employee, values her improved income and the opportunity for skill advancement, while Tsetse, a graduate from a local 3D printing program, expresses gratitude for the foundational experience gained.

With over 60 jobs created, an average monthly salary of 8,000 yuan, and initiatives sending employees for training in cities like Suzhou, Yingcai's impact reverberates. Its expanding influence prompts invitations from other cities, signaling its pivotal role in regional development.

Zhang lauds the company's integration of high-tech advancements into rural economies, highlighting its alignment with future development trends and substantial contribution to rural revitalization efforts in Xizang.

This 3D printing endeavor, backed by local committees and fostering technological progress, stands as a testament to the transformative power of innovation in empowering rural regions.

Conclusion

The 3D printing construction company in Lhasa, Xizang, marks an impressive six-month journey, significantly impacting village development. Through job creation, waste recycling, and superior product manufacturing, this enterprise not only benefits the local economy but also sets a pathway for technological advancement in rural areas. The promising market outlook and dividends for villagers signify a bright future, showcasing the pivotal role of innovation in fostering community growth and progress.

Bron Steelguru (via email)

Bijlage:

voda 4 januari 2024 08:30

Godrej's Innovation: 3D-Printed Office in 40 Hours

By Strategic Research Institute on Jan 04, 2024 11:15 am

Synopsis

Godrej Construction's milestone: 'The Cocoon,' a 500 sq ft 3D-printed office, emerged within 40 hours using pioneering 3D Construction Printing (3DCP) tech. This elliptical-shaped office, crafted with prefabricated modules and sustainable materials, showcases not only rapid construction but also a commitment to innovation and environmental sustainability.

Article

Godrej & Boyce, via its subsidiary Godrej Construction, achieved a remarkable feat by constructing a 500 sq ft office dubbed 'The Cocoon' within a swift 40-hour timeframe. This milestone stands as a testament to their dedication to pushing construction boundaries through groundbreaking technology.

'The Cocoon,' named for its unique elliptical design, was constructed using innovative 3D Construction Printing technology, assembling prefabricated modules with exceptional speed.

Anup Mathew, Senior Vice President of Godrej Construction, emphasized the project's demonstration of collaborative teamwork, strategic planning utilizing Building Information Modelling (BIM), Lean Construction methods, and 3D Construction Printing. The company's focus remains on delivering innovative and sustainable solutions tailored to meet customers' evolving needs.

The rapid construction encompassed a range of installations—from 3D printed modules to plumbing, electrical works, and office furniture—in under 40 hours, reflecting efficiency and comprehensive planning.

The construction materials featured up to 20% Recycled Concrete Aggregates (RCA), sourced from debris recycled at the Godrej & Boyce Recycled Concrete manufacturing facility in Mumbai, highlighting a commitment to eco-friendly practices.

Godrej Construction's foray into 3D Construction Printing technology extends beyond 'The Cocoon,' previously applied to bus shelters and security pavilions at the Vikhroli campus. The team's ingenuity lies not just in speed but also in embracing complex designs enabled by this technology.

Abhijeet Gawde, Head of Business Development & Marketing, stressed the significance of sustainable construction materials in reducing carbon emissions, underscoring the urgent need for more companies to adopt similar practices.

Conclusion

Godrej Construction's swift completion of 'The Cocoon' using 3D Construction Printing highlights a remarkable fusion of technology and sustainability. Their commitment to eco-friendly materials and innovative construction methods sets a precedent for the construction industry, paving the way for quicker, environmentally conscious building practices.

Bron: Steelguru (via email)

Bijlage:

nobahamas 6 februari 2024 20:17

Mijn verwachting voor Pyrogenesis:
Ik denk en hoop dat er binnen twee tot drie jaar op vele fronten bijzonder goede dingen gaan gebeuren.
Als eerste denk ik een langdurig leveringscontract van TiAl poeder aan een grote afnemer in aviation. Ik denk binnen een jaar.
In tunneling met plasma torches zie ik geen toekomt ( locale energievoorziening en warmte afvoer in de tunnel).
Fumed silica is op termijn een goudmijn maar de investering voor een grote productie fabriek is voor de korte termijn een probleem.
Er zal een grote mede investeerder gevonden moeten worden.
Pfas vernietiging zal ook nog wel enkele jaren nodig hebben tot een volwassen rendement.

Ik wacht met verdere aankopen tot een doorbraak die echt fikse lange termijn opbrengsten genereert.

Risico blijft dat Pyr op korte termijn in geldnood komt, en misschien bijzondere maatregelen moet treffen.

nobahamas 30 mei 2024 20:51

Pyrogenesis heeft de 10 procent provisie over de omzet van Hpq Silicon verruild voor een 50 procent ownership in Hpq Silicon.
Mogelijke redenen:
Een betere kans op financieel leenkapitaal voor Hpq.
Meer zekerheid tegen een vijandelijke overname van Hpq.
Het idee dat een 50 procent eigenaarschap meer waarde brengt voor Pyrogenesis dan de provisie van 10 procent over de omzet.
Op termijn wordt de boekwaarde van Pyrogenesis groter.

Al met al een positief signaal. De verwachting is dat fumed silica een succesverhaal wordt.

MadMushroom 23 juni 2024 09:20

Stilte voor de storm

nobahamas 4 juli 2024 21:07

Quote: Boson is now working with partner companies that will supply equipment and systems, including Siemens Energy, Montreal-based PyroGenesis, Vienna-headquartered RHI Magnesita, Norwegian green technology company Haldor-Topsoe and US conglomerate Honeywell..
www.rechargenews.com/energy-transitio...

mjmj 30 juli 2024 11:44

Pyro heeft een proces om pfas te vernietigen. Pfas zit in water, ook in drinkwater. Ik heb me een tijd lang afgevraagd hoe pfas uit water kan worden verwijderd. Vandaag las ik over hoge concentraties in zeeschuim. In het artikel stond deze paragraaf: 'Dat PFAS aan schuim bindt, is niet alleen maar slecht nieuws. Het principe wordt namelijk juist ook ingezet voor waterzuivering. „Een van de manieren om vervuild water te zuiveren is lucht in het water te blazen zodat zich schuim vormt”, zegt Smith. „De PFAS gaan hierin zitten, en dan kan het eenvoudig worden verwijderd. Het is een simpele methode. Door het meermaals te beluchten is de concentratie PFAS in het uiteindelijke schuim tot wel 100.000 keer hoger dan in het water. ” Een kans voor pyro?

nobahamas 30 juli 2024 21:35

Het probleem om de Pfas soorten te onttrekken uit vloeibare stoffen is zo goed als opgelost. Nederlandse vinding met circulaire moleculen die het Pfas vangen.
De verzamelde Pfas zal dan vernietigd moeten worden (lees: ontleed moeten worden tot stoffen die wel een binding aan kunnen gaan met andere stoffen).

Dit ontleden kan Pyrogenesis met de plasma torches door pyrolyse ( extreme hitte zonder zuurstof toelating).
Een mogelijke oplossing, wel duur.

voda 3 augustus 2024 10:24

Pioneering Progress: Ukraine's First 3D-Printed Home Rises from War's Ashes

Synopsis: Metinvest Group supported the construction of Ukraine's first 3D-printed house near Irpin for the family of fallen soldier Yaroslav Berezov. The project, led by 3D UTU and the Embrace the Nation Foundation, showcases innovative reconstruction efforts in war-torn areas.
Updated on :
Saturday, August 3, 2024

In a groundbreaking development that marks a significant milestone in Ukraine's reconstruction efforts, the country's first 3D-printed house has been erected near Irpin. This innovative project, supported by Metinvest Group, stands as a beacon of hope and technological advancement in the face of the ongoing conflict. The house, built for the family of fallen soldier Yaroslav Berezov, represents not just a technological feat but also a poignant symbol of resilience and recovery.

The construction of this pioneering home was a collaborative effort involving over 100 partners, spearheaded by the United for Help initiative of the Embrace the Nation Foundation. At the heart of this project was 3D UTU, which provided the first Ukrainian construction 3D printer used to create the structure. The printing process itself was remarkably efficient, with the 130-square-meter house being printed in just 58 hours. This rapid construction required 72 metric tons of a specialized quick-setting cement-sand mixture, demonstrating the potential for fast, large-scale housing solutions in post-conflict reconstruction.

Voor meer, zie link:

www.oreaco.com/steel/pioneering-progr...

voda 13 september 2024 07:22

Celestial Forge: Stainless Steel Printing Soars to New Heights in Space

Synopsis: The European Space Agency successfully tested a 3D steel printer on the International Space Station, developed by a consortium including Airbus Defence and Space, AddUp, Cranfield University, and Highftech Engineering. The printer created its first steel component in space, marking a significant milestone in space manufacturing.
Thursday, September 12, 2024

In a groundbreaking achievement, steel manufacturing has officially entered the space age. On May 30, 2024, a 3D metal printer aboard the International Space Station successfully printed its first steel component, revolutionizing in-orbit manufacturing capabilities. This historic event took place in the European Space Agency's Columbus Laboratory module, where the printer created a small s-curve from liquefied stainless steel, demonstrating that 3D steel additive manufacturing is possible in the microgravity environment of space.

ESA technical officer Rob Postema explained the significance of this achievement, stating that the s-curve was a test line that successfully concluded the commissioning of their metal 3D printer. This initial success, along with other reference lines, has paved the way for printing full parts in the near future. While polymer-based 3D printers have been operating on the ISS for some time, metal printing presented a greater challenge due to the higher temperatures and lasers required to melt the metal.

Voor meer, zie link:

www.oreaco.com/steel/celestial-forge-...

voda 17 oktober 2024 09:09

Revolutionizing Steel: Breakthrough in 3D Printing of 17-4 PH Stainless Steel

Synopsis: Researchers have developed a method for producing 17-4 PH stainless steel through 3D printing, overcoming significant challenges in the process.
Thursday, October 17, 2024

Recent advancements in additive manufacturing, commonly known as 3D printing, have enabled researchers to consistently produce 17-4 PH stainless steel, a material renowned for its strength and corrosion resistance. Traditionally, printing with steel and other alloys has posed considerable challenges due to the rapid temperature fluctuations that occur during the laser heating process in 3D printers. These thermal changes can disrupt the atomic arrangement of the metal, making it difficult to achieve the desired toughness.

To tackle this issue, scientists utilized bright X-ray beams to monitor the quick changes in temperature and material structure in real time. By observing these transformations, researchers could adjust the chemical composition of the steel during the printing process, resulting in a more durable final product. This innovative approach not only enhances the properties of 17-4 PH stainless steel but also opens new avenues for its production.

Voor meer, zie link:

www.oreaco.com/steel/revolutionizing-...

voda 22 november 2024 09:39

Revolutionizing Steel Production: High-Performance Plain Carbon Steels via 3D Printing

Synopsis: Recent advancements in 3D printing technologies have enabled the production of high-performance plain carbon steels. These steels, produced using metal 3D-printing methods, offer superior tensile and impact properties, comparable to ultra-high strength alloy steels, while simplifying material compositions and enhancing customization.
Friday, November 22, 2024

Over the past century, the mechanical performance of structural metals, particularly steel, has significantly improved. However, this progress has often been accompanied by increasing alloy complexity. Engineers and manufacturers developed a vast array of specialized compositions to meet specific mechanical and performance demands. While this innovation led to stronger and more durable materials, it also brought challenges such as higher production costs, complicated recycling processes, and vulnerabilities in supply chains due to the distribution of raw materials. In recent years, researchers have begun to rethink this approach, exploring ways to simplify alloy compositions without compromising performance. A groundbreaking study in Nature Communications has highlighted how metal 3D-printing could provide a solution to this dilemma by enabling the creation of high-performance plain carbon steels.

Traditional steel manufacturing techniques typically require the use of complex alloying elements to achieve specific mechanical properties such as ultra-high strength, wear resistance, or corrosion resistance. These alloying elements, while effective, complicate the production process and make recycling difficult. For example, the production of high-performance martensitic steels often requires precise control over the chemical composition and cooling rates, which can involve slow, energy-intensive processes like heat treatment and quenching. Such methods not only increase the costs of production but also limit the design flexibility of components due to challenges in controlling material properties across different shapes and sizes.

Voor meer, zie link:

www.oreaco.com/steel/revolutionizing-...

voda 16 december 2024 07:48

Pioneering 3D Printing Process Elevates Strength of Stainless Steel 17-4 PH

Synopsis: Researchers have successfully developed a method to consistently produce 17-4 PH stainless steel through 3D printing, addressing challenges posed by rapid temperature changes during the process. This breakthrough could lower costs and enhance manufacturing flexibility, making this durable material more accessible for industries like aerospace, marine, and medical device manufacturing.
Monday, December 16, 2024

A team of researchers has unlocked a new way to manufacture 17-4 PH stainless steel using 3D printing, a process previously hindered by rapid temperature shifts that distorted the material’s atomic structure. This breakthrough is a significant advancement for industries that rely on 17-4 PH, known for its high strength and corrosion resistance, such as aerospace, medical devices, and marine applications.

The challenge with 3D printing metals, especially alloys like 17-4 PH, lies in managing the extreme temperature fluctuations that occur when the material is heated by the printer's lasers. These shifts can disrupt the material's crystal structure, making it difficult to maintain the strength and durability that 17-4 PH is known for. To overcome this, the team used high-energy X-ray beams from the Advanced Photon Source at Argonne National Laboratory to observe these changes in real-time. By analyzing these observations, the researchers adjusted the material’s chemical composition to compensate for structural changes, leading to a more durable final product.

Voor meer, zie link:

www.oreaco.com/steel/pioneering-3d-pr...

Bowski 16 december 2024 23:17

17-4 stainless steel can be heat treated to approximately 44 Rc,[1] and an ultimate tensile strength of 1,300 MPa (= 130kg/mm2). De vraag is of het 3D geprint ook zo sterk is.

PS:
Het komt in de buurt.
www.sciencedirect.com/science/article...

The as-printed material exhibits a yield strength of 1157 ± 23 MPa, comparable to its wrought counterpart after precipitation-hardening heat-treatment.

voda 17 januari 2025 07:47

Laser 3D Printing Boosts Heat-Resistant Steel's Creep Life by Over 10 Times

Synopsis: A groundbreaking study from the National Institute for Materials Science has shown that laser powder bed fusion, a form of 3D printing, can significantly increase the creep life of heat-resistant steel. The technique enhances the material's ability to withstand high temperatures and pressures for much longer periods, offering a tenfold increase in durability compared to conventional steel production methods.
Friday, January 17, 2025

Voor meer, zie link:

www.oreaco.com/steel/laser-3d-printin...

6.220 Posts, Pagina: « 1 2 3 4 5 6 ... 306 307 308 309 310 311 | Laatste

Aantal posts per pagina: 20 50 100 | Omhoog ↑

Meedoen aan de discussie?

Word nu gratis lid of log in met uw e-mailadres en wachtwoord.

Direct naar Forum

Markt vandaag

AEX 922,19 -8,22 -0,88% 09:41


Germany40^	22.819,30	-1,42%
BEL 20	4.461,61	-0,18%
Europe50^	5.470,59	-1,27%
US30^	43.249,90	+0,15%
Nasd100^	20.515,20	+0,35%
US500^	5.866,22	+0,30%
Japan225^	37.291,30	-0,07%
Gold spot	2.914,09	+0,66%
EUR/USD	1,0518	+0,30%
WTI	67,63	-0,89%